|
|
|
|
INTERMEC
IF30 RFID Reader
|
  |
|
 |
|
Home >
Category >
Data Collection >
Intermec >
IF30 Fixed RFID Reader |
The Intermec IF30 fixed RFID tag is a cost-effective, high performance fixed reader that reliably reads and writes UHF RFID tags in "RF noisy" environments. The Intermec IF30's receive sensitivity enables large populations of tags to be interrogated at high speeds, which is critical to many use cases involving dock doors, portals and conveyors.
The Intermec IF30 is a cost-effective, high performance fixed
reader that reliably reads and writes UHF RFID tags in
“RF noisy” environments. The Intermec IF30’s receive sensitivity
enables large populations of tags to be interrogated at
high speeds, which is critical to many use cases
involving dock doors, portals and conveyors. In addition
to reading tags at distances over 15 feet (4.6 meters),
the Intermec IF30 can filter tag data to prevent sending
redundant information to the host system.
With best in class Dense Reader Mode performance, the
Intermec IF30 fixed reader allows users to grow their RFID
operations to include multiple dock doors in close
proximity, thus enabling accurate, automated receiving
and shipment verification. This drives more effective
put away processes. Increased receive sensitivity allows
the Intermec IF30 to interrogate weaker/unreadable tags that
often lead to expensive exception handling processes and
slower supply chain throughput.
Unlike all competitors, the Intermec IF30 has a built-in power
supply and 4 mono-static RF ports which reduce the costs
and complexity at installation with fewer component
pieces to complete the overall solution.
Continuing to focus on keeping the costs of ancillary
equipment and installation low, the Intermec IF30 fixed reader
includes powered general purpose input/output (GPIO)
circuitry, which allows direct monitoring and/or
controlling of peripherals such as presence detectors
and signal lights without requiring extra devices and
power supplies to facilitate the connection.
Intermec SmartSystem™ Foundation, a device management
system included on the Intermec IF30, lets you view and configure
all of the settings contained in the device from one
convenient location allowing for a quicker set-up.
SmartSystems-enabled devices appear on an
administrator’s console, providing real-time visibility
to device status and information, and centralized access
to remote devices like the Intermec IF30 reader.
The intuitive console allows administrators to change
device settings, send firmware upgrades, update software
applications, and execute other changes directly from
the console to save time and significantly cut costs.
The Intermec IF30 reader is also supported by Intermec’s
RFIDeploySM Services which provide process analysis,
site analysis and installation. By deploying the full
suite of services, your system performance will be
guaranteed for 18 months, or you may simply select the
service that will facilitate the completion of your RFID
roll out.
In support of a global supply chain, the Intermec IF30 is FCC and
ETSI certified, and is factory configured to operate in
RFID frequency bands 865MHz, 869MHz and 915MHz. |
|
|
