This product is no longer
available. For more Intermec Products, view the
Intermec Main Page. We will continue to
carry options, accessories and supplies for this product for as long as we
can. Please call for availability and pricing.
------------------------------------------------------------------------------------------------
Intermec MobileLAN
access 2100
Intermec MobileLAN access
2100 Features
-
Fiber optic connectivity
without cumbersome and costly external converters
-
10/100 Ethernet for the
highest data rates possible
-
VoIP optimization to
leverage the wireless LAN for voice and data
-
Integrated Power over
Ethernet solution eliminates expensive cabling
-
IEEE 802.11b compliant and
Wi-Fi certified ensures interoperability and investment protection
-
11 Mbps performance supports
bandwidth- intensive applications
-
NEMA4/IP54 case withstands
harsh environments
Intermec MobileLAN access 2100 is
the most advanced 11 Mbps wireless access point available for
high-speed, high-throughput, demanding environments. Compliant with
802.11b standards, Intermec MobileLAN access 2100 sets a new standard in access
points with advanced features and better performance. Housed in a
NEMA4/IP54 case with heater options, Intermec MobileLAN access 2100 is the ideal
access point for harsh environments where cold temperatures, small
airborne particles and moisture are prevalent.
High Performance Wireless
Communications
Fiber optic network connectivity is now possible on Intermec MobileLAN access
2100 via an MT-RJ connector. Wireless service on 100 Mbps networks is
now achievable with 10Base-T/100Base-Tx compatibility on Intermec MobileLAN
access 2100. It auto negotiates with the device it is connected to
allowing the data rate to be set at the highest rate at which both
devices can communicate. Intermec's patented dual radio support as well
as support for S-UHF, 900Mhz and Open Air technologies continue to be
available on Intermec MobileLAN access 2100. Recognizing that Ethernet can have
data rates as high as 100Mbps and that radio data rates are no more than
11 Mbps, Intermec designed a more efficient method for its access points
to forward packets from the Ethernet to the radios.
Intermec MobileLAN access 2100 uses
hardware based packet filtering, which ensures fewer dropped packets,
less network congestion and better overall performance. Intermec MobileLAN access
2100 leads the industry with seamless IP tunneling. This feature
eliminates the requirement to have the routing application reside in the
client. The technology supports wall-to-wall bridging, which allows your
wireless network to grow without the expense of expanding the wired
backbone.
Intermec MobileLAN access 2100
expands the options available to IT managers with integrated Power over
Ethernet and support for VoIP. IP addresses are easier and less
expensive to administer on Intermec MobileLAN access 2100 with DHCP (Dynamic Host
Configuration Protocol) server functionality.
Intermec
MobileLAN access 2100 can use any standard RADIUS server for optimum
network security. Additional security is provided through WEP key
management. Intermec MobileLAN products are compliant with the IEEE 802.11b
standard and will provide a migration path to support the pending
standard, IEEE 802.11a.
Intermec MobileLAN
Access 2100 General Specifications
Physical Characteristics
Length
355mm (14.0")
Height
95mm (3.75")
Width
236mm (9.3")
Weight
2.63kg (5.8lb)
Input Voltage
100-240 VAC Auto Ranging Power Supply
Input Power
15 watts; optional heater, additional 75 watts supports dual radio and
mixed dual radio operation, wireless bridging, DHCP client and server,
NAT server, RADIUS server
Wireless LAN Characteristics
IEEE 802.11b High Rate Wireless Radio
Frequency Band
2.4GHz (actual frequencies vary by country)
Radio Type
IEEE 802.11b High Rate (11Mbps)
Modulation
Direct Sequence Spread Spectrum (CCK, DQPSK, DBPSK)
Radio Power Output
15dBm
Radio Data Rate
11Mbps High/5.5 Mbps Medium/2Mbps Standard/1Mbps low
Automatic Fallback for increased range
Channels
United States (FCC) 11 Channels, Europe (ETSI) 13 Channels, other
countries per local regulations
Bit Error Rate
Batter than 10-5
Security
IEEE 802.11 wired equivalent Privacy (WEP) standard, WEP64 and WEP128
are supported
2.4 GHz OpenAir Wireless
Radio
Frequency Band
2.4 Ghz, actual frequencies vary by country
Radio Type
WLI Forum OpenAir
Radio Power Output
500mW/100mW (Europe)
Radio Data Rate
1.6Mbps per channel. 800 Kbps fallback rate for extended range.
Channels
Supports 15 independent, non-interfering virtual channels (hopping
patterns)
Receiver Sensitivity
-77 dBm @ 1.6Mbps /-85 dBm @ 800 kbps
Range
Up to 150m (500ft) radium indoors, 300m (1000ft) outdoors
Security
20 digit security ID's available
900MHz Falcon Wireless Radio
Frequency Band
902-928 MHz frequency band
Radio Type
Direct Sequence Spread Spectrum (DSSS)
Radio Power Output
Minimum
24dBm (250mW)
Typical
25.5dBm (350mW)
Maximum
27dBm (500mW)
Radio Data Rate
90, 255, or 450Kbps
Channels
7 @ 90Kbps, 1 @ 225 or 440Kbps
Range
Up to 600m (2000ft) [line of sight]
Coverage
9,000-31,500m [100,000-350,000 sq. ft.] (conservative)
Synthesized UHF Wireless
Radio
Frequency Band
430-450 MHz (Low Band) 450-470 MHz (High Band)
Radio Type
Synthesized UHF (four-level frequency shift keying)
Radio Power Output
0.5W (27dBm) Low and High Bands, 10mW (10dBm)
Radio Data Rate
19.2Kbps (14.4 Kbps with forward error correction)
Receiver Sensitivity
-105 dBm
Range
Up to 1,067m (3,500ft) line of sight
Coverage
0.5 W, 74,320 sq m (800,000 sq ft) indoors
10mW, 9,290 sq m (100,000 sq ft) indoors
Channels Spacing
20KHz or 25KHz
Network Information
Ethernet Interface
10/100 BaseT
Optional MT-RJ Fiber Interface (new)
Ethernet Data Rate
10/100 Mbps
Filtering Rate
Full Ethernet Rate
Filters
Protocol filters-IP, IPX, NetBEUI, DECNET, AppleTalk, Other Broadcast
Traffic Filters - IP, ARP, Novell RIP, SAP and LSP, Adjustable bandwidth
allocation
Software Upgrades
Downloadable using Web Browser or TFI over the network or serial port
Management
Management Interfaces
SNMP; Web browser-based manager; serial port, or Telnet via RF, serial
and Ethernet
SNMP Version1 Agent
supporting
SNMP Traps
Cold start, authorization violation, MobileLAN access point enterprise
specification
SNMP MIBs
RFC 1213, RFC 1398, MobileLAN access point MIB
Environment
Operating
Standard Unit
-25 to 70C (-13 to 158F)
Heater Option
-30 to 70C (-22 to 158F)
Heater Option with insulated
bag
-30 to 0C (-22 to 32F)
Storage Temperature Range
-40 to 70C (-40 to 158F)
Humidity
10 to 90% relative humidity non condensing
Industrial Sealing
IP54 (NEMA 4)
Accessories
Mounting brackets
Wide selection of RF antennas and cables
Regulatory Approvals
FCC part 15.247 Certified
Canada RSS 210 Certified
ETS 300 328 Type Approved
EN 55022/CISPR 22 Class A
FCC Part 15 & ICES-003 Class A
SCT Certification, NOM-EM-121
AS 3548, C tick Marked
Compliant with all European Directives, CE Marked
Compliant with all European Directives, CE marked (ETS 300 826)
UL Listed, UL 1950/C22.2 #950 IEC
60529-IP53 and C22.2 #94-ENC3.5
Non-incendive 2.4 GHz and 900 MHz antenna circuits UL Listed, UL 1604 &
C2.2 #213 for Div 2
Class I- Groups A, B, C & D
Class II- Groups F & G
Class III
TUV Licensed, EN 60950 & EN 60529-IP53
NYCE Certified, NOM 19
Intermec reserves the right
to make changes without notice to any products herein for any reason at
any time, including but not limited to improving the reliability, form,
fit, function or design. Please contact Intermec for a current price
list and availability.
Call
513-984-2101 or 800-446-1991 for the RACO Discount!