Hand Held Products (formerly HHP)


 

  

This product line has been retired, please see the HHP page for more selections or contact a RACO Sales rep for more information. RACO will keep accessories available for as long as possible check with a RACO sales rep for availability and replacement products.

------------------------------------------------------------------

Hand Held Products IMAGETEAM 4410ESD 2D Image Reader 
for ESD-Sensitive & Clean Room Applications

Hand Held Products IMAGETEAM 4410ESDThe Hand Held Products IMAGETEAM (IT) 4410ESD 2D Image Readers are high performance readers of high density linear (1D), stacked (PDF417), and matrix (2D) codes, that have been designed specifically for the stringent requirements found in clean room assembly of sensitive electronic components. With a clean room rating of 100, ESD-resistant labeling, low particulation and contamination plastics, and ESD-resistant cables, the Hand Held Products IT4410ESD readers are the most suitable hand held 2D image readers for ESD-sensitive and clean room environments today. Together with our Hand Held Products IT3800ESD Hand Held Linear Imager, Hand Held Products offers the most complete line of ESD-resistant readers.

Internal components of Hand Held Products IT4410ESD 2D Image Readers are isolated from the conductive path formed by the case, output connector shield, and special shielded cable with drain wire. The 2D Image Reader is rated for discharges up to 15kV without damage. All materials are tested using the methods described in ASTM D257, Standard Test Methods for Conductance of Insulating Materials. The surface resistivity is rated at less than 10E5 ohms/square inch. Triboelectric residual charge measured with a no-contact electrostatic field meter is less than 5 volts on any surface.

The Hand Held Products IT4410ESD 2D Image Reader provides omni-directional and auto-discrimination decoding for symbologies, such as Data Matrix, PDF417, QR, Aztec, Code 39, Code 128, Interleaved 2 of 5, Codabar, UPC, and EAN, as well as RSS-14, composite codes, postal codes, and MaxiCode. Additional symbologies will be added as required.

Two focal point models are available: the Hand Held Products IT4410E-HD (2" / 5.1cm focal point) which is ideal for reading matrix (2D) symbols that have cell sizes less than 10mil (.010"), and the Hand Held Products IT4410E-HD10 (3" / 7.6cm focal point) for reading matrix (2D) symbols with cell sizes greater than 10mil (.010"). Both are excellent readers of high density linear (1D) symbols.

Features & Benefits

  • Supports all popular 2D symbologies
    Hand Held Products IT4410ESD supports all popular matrix and stacked linear symbologies: MaxiCode, Data Matrix, QR, and PDF417. Additional symbologies will be added as emerging codes are approved by AIM.

  • Clean room ready
    Cleaned and triple-bagged for class 100 environments

  • ESD Labels
    Labels are located either behind the optically coated, grounded, conductive reader window inside the cable well, or are manufactured from conductive material and attached with conductive adhesive.

  • Low Particulation and Contamination
    The housing material is slough-resistant and provides excellent electrostatic and grounding with low particulation. All labels on the outside of the reader are located far from the front of the reader

  • ESD-Resistant Cables
    Stainless steel, grounded cables, which eliminate one more source of electrostatic build up, are available for both true RS232 and wedge interfaces

  • Omni-Directional scanning
    The video technology basis for the IT4410ESD means it can offer omni-directional scanning, even on linear codes, greatly simplifying operator training and increasing productivity

  • Autodiscriminates between supported symbologies and fonts
    Reads all major linear, stacked linear, and matrix bar codes, as well as machine readable fonts used in Optical Character Recognition (OCR)

General Specifications

Performance
4410E-HD Focal Point: 2" (5.1cm) from nose
4410E-HD10 Focal Point: 3" (7.6cm) from nose

HD Working Range
(typical)		 6 pt OCR
20cpi		 6.6mil QR
(.017cm)		 6.6mil 
Data Matrix
(.017cm)		 4mil Linear
(.01cm)
Near 2" (5.1cm) 1.7" (4.3cm) 1.7" (4.3cm) 1.6" (4.6cm)
Far 3.5" (8.9cm) 2.45" (6.2cm) 2.45" (6.2cm) 2.7" (6.9cm)

Rotational Sensitivity
360

Viewing Angle
+45

Ambient Light
Total darkness to 100,000 lux (full sunlight)

Aiming
660nm LEDs provide bright aiming line

Symbologies

2D
MaxiCode, PDF417, MicroPDF417, Aztec, Aztec Mesa, Data Matrix, QR Code, Code 49, UCC Composite, Snowflake*, Vericode*, Dataglyphs*

Linear
Code 39, Code 128, Codabar, UPC, EAN, I 2 of 5, RSS-14, BC 412*, Code 93, Codablock
* available to licensed users only

Postal
Postnet (US), BPO4 State, Canadian 4 State, Japanese Post, KIX (Dutch Post), Planet Code

OCR Fonts
OCR-A, OCR-B

Interfaces
RS232, Wedge, and HHLC (Code 128 Emulation)

Programmable Options
Baud, Parity, Data Formatting, Code Options

Mechanical/Electrical

Length
4.8" (12.2cm)

Width
2.5" (6.4cm)

Height
5.6" (14.2cm)

Weight w/o cord
8oz (224g) or less

Power Requirements
4 to 9 volts

Current Draw
Lower Power Mode - average @ 5 VDC-40mA
Medium Power Mode - average @ 5 VDC-125mA
High Power Mode - average @ 5 VDC-175mA

Standby Current
<200A @ 5V

Environmental

Operating Temperature
-0C to 50C

Storage Temperature
-40C to +70C

Humidity
95% RH, non condensing at 50C

Shock
10 drops 5 ft to concrete @ room temperature

ESD
Functional after 15KV discharge

Surface Resistivity
Less than 10E5 ohms/square inch as measured by ASTM D257, Standard Test Methods for Conductance of Insulating Materials

Triboelectric Residual Charge
Less than 5 volts as measured by non-contact Electrostatic Field Meter

Agency
FCC Class A, CE

Complies with: EMC 89/336/EEC and LVD 73/23/EEC

Call 513-984-2101 or 800-446-1991 for the RACO Discount Price!

Back to Hand Held Products


RACO Industries has competitive prices and quality, guaranteed. View our Manufacturers Listing Page to see a listing of manufacturers with their products that we sell or visit our Home Page to learn more about the products that we carry and about RACO Industries. To hear our most recent low prices just call us at 513-984-2101 or 800-446-1991!

RACO Industries also carries a full line of barcoding printers, supplies, software and accessories. Call for more details!

RACO Industries. Specifications and prices listed are subject to change without notice. All products and brand names are trademarks of their respective companies. All rights reserved.