Logic Controls LC8200
Series Industrial Computer 
Fanless and
Reliable
Industrial computers need to be reliable, as they often are used for
mission critical applications and not placed in an office environment.
The Logic Controls LC8200 provides unparalleled reliability by being a fanless unit. It is an ideal computer for use in harsh environments with
high levels of dust or oil or when fan noise is not desirable. For
enhanced reliability, all of the computer components and connectors
reside on one PC board. The Logic Controls LC8200s single board computer limits the
number of internal cables, a common source of loose connections and
failures. A true no-moving-part operation is provided when compact flash
is used for mass storage or boot-from-network configurations are
employed.
Ultra Compact & Rugged
The Logic Controls LC8200 has a very compact form factor
only 2H x 8W x 6D. Two mounting brackets enable these modules to be
mounted almost anywhere on a wall, ceiling, table top or under a
counter. The computer is housed in a rugged die cast case for extra
protection.
Full
Compliment of I/O Ports
The Logic
Controls LC8200 also provides a very impressive compliment
of up-to-date and legacy I/O ports. Up to 4 serial, 4 USB 2.0, 2
independent SVGA, 1 parallel, 1 Ethernet, 1 PS/2, microphone and speaker
ports are all available. Hence industrial applications that require
serial or parallel interfaces are fully addressed. The
Logic Controls
LC8200 also uses
Intel-compatible, Pentium-class processors, so it can run Windows and
Linux-based applications. Whether your application runs on Windows XP,
Windows XP embedded, Windows 2000, Windows CE or Linux, your operating
system needs are supported by the Logic
Controls
LC8200. This enables the unit to be
used in a wide variety of applications in a restaurants kitchen
system, in a POS workstation, in an auto ID workstation, etc.
Logic Controls
LC8200
Computer Features
- Fanless operation
- Intel Celeron-M 800MHz to 1GHz
- Ultra compact - only 2" H x 8" W x 6" L
- Mass storage: Compact flash or/and hard disk drive
- Enclosed in rugged die cast case
- 128MB to 1GB SODIMM RAM
- No internal connecting cables and no internal
moving parts for ultimate reliability with CF mass storage
- Large number of available I/O ports: 4 USB
2.0, 4 serial, 1 VGA, 1 Ethernet, 1 PS/2 keyboard/mouse, 1 LPT, speaker out,
microphone in, power input
- Multimedia: 1280x1024 resolution with 32 bit
color, AGP 4x, MPEG-2 decoding and video, integrated 128bit 2D and 64bit graphics engine, AC97 Audio CODEC
- System boot from CF, HDD, USB or network
- Power: Wide range of input voltages, 9 to
24VDC, suitable for mobile applications
- Custom configurations available
Logic Controls LC8200
Computer Specifications
System
Processor
Intel Celeron-M 800MHz to 1GHz
Memory
128MB to 1.0GB SODIMM
Hard Drive
Internal Compact Flash, 64MB to greater than 4GB
Optional internal IDE 2.5" hard drive (40GB up)
Primary Video
1280x1024 pixels max, 32bit color,MPEG-2, 128bit 2D and
64bit 3D graphics engine, 64MB max shared video memory
Secondary Video
(optional)
1024x768 pixels max, 24bit color, 4MB video memory
Network
Interface
10/100 Base-T Ethernet, Network boot capable
Keyboard/Mouse
PS/2
USB Port
4 USB 2.0 ports
Serial Port
COM1, COM2, COM3 (external side connector), COM4 (internal connector)
Parallel Port
LPT1
Audio
Speaker-out and Mic-in, AC97 Audio CODEC
Electrical (external switching power adapter- included)
Input
100 to 240VAC
Input Frequency
47 to 63Hz
Input Currency
<1.5A @ 120VAC
Output
+12VDC / 5.0A
LC8000 can accept an input voltage range from 9 to 24 VDC
Ripple Voltage
< 120mVp-p
Mechanical
Weight
3.0lbs
Dimensions
8.0" W x 6.3" L x 2.0" H
Housing
Die cast
Environment
Operating
Temperature
5C to 40C
Relative
Humidity
8 to 80% non condensing
Storage
Temperature
0C to 60C
Relative
Humidity
5 to 80% non condensing
Connectors
SVGA
Standard, DB15 male connector
Keyboard and
Mouse
PS/2 mini-DIN6 female connector
RS232
Standard DB9 male connector
USB
Standard USB type-A connector
Ethernet
RJ45 8pin female connector
Audio
Speaker out/Mic in phone jacks
Parallel
Standard, DB25 female connector
DC Power
Shielded snap lock mini-DIN with EMI/RFI suppression, 3pin female
connector
Logic Controls LC8200
Computer LIST Pricing:
| Part # |
Description |
List Price
Call for Discounts! |
|
LC-8072-40-XPP |
LC8000 indust. computer, w/733MHz, *discontinued* use LC8200 |
Call for $ |
|
LC8200 |
Indust. computer, 800MHz Celeron
processor, XP Pro, 40GB HDD, 256 MB |
$850 |
|
LC8200X-SODIMM1G |
LC8200 w/1GHz |
Call for $ |
|
LC8200N |
No operating system, 40GB HDD |
$665 |
|
LC8200-WP-CF81GBR-DE |
LC8200 (no HDD) w/ 1GB RAM, 8GB CF, &
WEPOS |
Call for $ |
|
LC8200X |
Obsolete, use LC8200N processor, 256MB
mem |
Call for $ |
|
LC8280 |
LC8200 w/800 MHz CPU, no comp (bar
bones) w/3 yr warranty |
Call for $ |
|
LC8282-512CF-XPE-DEL |
LC8200 w/512CF, 256MB RAM-XPE 3 yr
warranty; Dell only |
Call for $ |
|
LSKDSBLCF |
Logic Serve KDS bundle, LC8200 KB1700
w/cable |
Call for $ |
|
LSKDSBLCF-15 |
Logic Serve KDS bundle, LC8200 KB1700
w/cable, 15" monitor |
Call for $ |
|
LSKDSBLCF-17 |
Logic Serve KDS bundle, LC8200 KB1700
w/cable, 17" monitor |
Call for $ |
|
LSKDSBLHD |
Logic Serve KDS bundle, w/LC8200, KB1700
w/cable |
Call for $ |
|
LSKDSBLHD-15 |
Logic Serve KDS bundle, LC8200 KB1700
w/cable, 15" monitor |
Call for $ |
|
LSKDSBLHD-17 |
Logic Serve KDS bundle, LC8200 KB1700
w/cable, 17" monitor |
Call for $ |
|
POSBLXP |
POS bundle LB3000 |
Call for $ |
Call
800-446-1991 or 513-984-2101 for the RACO Discount Price!
Specifications and pricing subject to
change without notice.