This product line has been retired, please see the HHP page for more selections or contact a RACO Sales rep for more information. RACO will keep accessories available for as long as possible check with a RACO sales rep for availability and replacement products.

------------------------------------------------------------------

Hand Held Products Quick Check OLV-20 On-Line Verifier

Overview

On-line Verification Ensures Quality Bar codes From Your Printers
Bar code verification is more than just scanning a bar code to see if it can be read. Verification is a process of decoding the data, measuring critical key characteristics, and assuring that the bar code will be readable in a wide variety of environments and scanning systems. By placing this verification "on-line", you can reduce costly waste of time, resources and labor right at the source of potential problems.

The One Series of Verifiers Designed Specifically For Your Business Needs
The Hand Held Products Quick Check series of on-line bar code verifiers provides continuous inspection of labels as they are being printed, applied, stacked or handled. Bar codes should be verified by decodability, readability and overall quality as close to generation as possible. Our product design gives you the flexibility to place an on-line verifier into your process precisely where it will do the most to improve productivity, reduce cost and increase quality.

The Hand Held Products Model 20 uses a laser verifier separate from the main controller for "print-and-apply" or conveyor verification arrangements and it has an internal power supply. This verifier will read one-half inch high bar codes at speeds of up to eight inches per second.

It's Like Having an Extra Set of Eyes Watching Over Your Business All the Time
The Hand Held Products Model 20 can be programmed to use data from the verifier about the quality of the bar codes in process to automatically control the printer's pause function or to illuminate an indicator light, activate an external alarm, shut down the system or initiate other functions of your choice. Also, because of its detachable verification design, the Hand Held Products Model 20 can also be programmed to control conveyor and other machine functions.

Get the Performance You Expected From Your Bar Code Program
Poor quality bar codes can bring a lot more problems than just short-term process costs and productivity losses. Unreadable or incorrect bar codes can cause massive shipping returns, database corruption and even customer fines. The accuracy, readability and compliance of each and every bar code we use is critical. All the productivity and cost savings we expect when we institute bar code programs can only be realized if we ensure the quality of the bar codes themselves.
 

Features/Benefits

1. Precise, continuous bar code verification.
2. Automated monitoring of your barcode production.
3. Real-time quality control
4. Flexible, easy-to-learn / use programming

Configuration

        Separate controller and scanner
        Powered by internal power supply

Mechanical Specifications

Dimensions:
        control box
        9.125in W x 9.125in H x 3.125in D (23.2cm W x 23.2cm H x 7.9cm D)
        scanner
        3.0in W x 2.2in H x 6.1in D (7.6cm W x 5.6cm H x 15.5cm D)
Weight:
        4 lbs (1800 g)

Electrical Specifications

Communications:
        RS-232
Input Voltage:
        +5 VDC (300 mA max.)
Indicators:
        6 LEDs:
        5 indicate output status
        1 indicates synchronization
Open Collector Outputs:
        250 mA sink (maximum)
        24 VDC pull-up (maximum)
Switch Input:
        Internal 10K pull-up to 5 VDC
        External pull-up to 24 VDC (maximum)
Electrically Isolated Input:
        two wires
        + and -
        input resistance
        47K ohms
Activation Voltage:
        +15 VDC to +100 VDC
        120 Hz fully rectified 100 VDC RMS is acceptable
Keypad (4-button):
        select
        enter
        F1
        F2
Liquid Crystal Display:
        2 line x 16 character LCD

Environmental Specifications

Operating temperature range:
        32 to 122 F (0 to 50 C)
Storage temperature range:
        -40 to 158 F (-40 to 70 C)
Relative Humidity:
        5% to 95% (non-condensing)
 

Optical Specifications

Scanner Illumination:
        method
        Moving beam
        wavelength
        670nm
System Scan Rate:
        40 scans/second (nominal)
System Analysis Time:
        50 ms (nominal)
X Dimension (minimum):
        7.5 mil (0.19 mm)

Symbologies Verified

Bar Code Types:
        Code 39
        Interleaved 2 of 5
        UPC/EAN with addendums
        Codabar
        Code 128
        Code 93

Applications Verified

Application Types:
        AIAG B-1
        AIAG B-3, B-4, B-5
        LOGMARS
        UCC / EAN / ITF

Verification Methods

Parameters determined by:
        Traditional (except print contrast signal)
        ANSI/CEN (decode and decodability only)

Programmability

Programmable for:
        No Read
        Warnings
        Rejects
        Good Evaluations
        Scanned Profile Grading (based on decodability)
        Synchronized Operation
        Control of Key Printer or Machine Functions

Models and Accessories

Interfaces

Safety / Regulatory

Regulatory approvals:
        FCC Class A limits

Hand Held Products Quick Check OLV-20 On-Line Verifier:

Back to Hand Held Products
See Scanners and Data Collection page for more choices.

RACO Industries has competitive prices and quality, guaranteed. View our Manufacturers Listing Page to see a listing of manufacturers with their products that we sell or visit our Home Page to learn more about the products that we carry and about RACO Industries. To hear our most recent low prices just call us at 513-984-2101 or 800-446-1991!

RACO Industries also carries a full line of barcoding printers, supplies, software and accessories. Call for more details!

RACO Industries. Specifications and prices listed are subject to change without notice. All products and brand names are trademarks of their respective companies. All rights reserved.