TOWA
Towa Label Applicating Technology
(Towa Applicator / Towa Dispenser)
Label applicators increase productivity and help the bottom line.
Every business that uses labels can benefit from this label
applicator.
Towa applicators use an exclusive label edge detector which
automatically detects the leading edge of the label providing
complete accuracy in dispensing. Each of three applicators can
dispense any type of label and requires no special liner tool,
cartridges or cassettes.
Towa has these unique features:
- Easy side web loading minimizes
threading time
- Exclusive label edge detector eliminates
need for special liner slits of perforations
- Positive feed roller provides proper
dispensing
Towa Applicator Video
Video: Towa AP65-30, AP65-60 and AP65-100
(Easy to Load & Easy to Use)
Towa Applicator Specifications
| Model |
Label Size STROKE |
Label Size WIDTH |
Max Outer Diameter |
| Towa AP65-30 |
20-60 mm |
20-30 mm |
100 mm |
| Towa AP65-60 |
20-60 mm |
25-60 mm |
100 mm |
| Towa AP65-100 |
20-60 mm |
55-100 mm |
100 mm |
Determining Your Towa Applicator Needs
The following specifications offer guidelines to use when selecting
the appropriate dispenser for your needs.
| Dimension |
30mm |
60mm |
100mm |
| Roll Size |
88.9mm OD
3 1/2" |
88.9mm OD
3 1/2" |
88.9mm OD
3 1/2" |
| Core Size |
25.4mm ID 1" |
25.4mm ID 1" |
25.4mm ID 1" |
| Max Label Width |
28.575mm
1 1/8" |
57.15mm
2 1/4" |
98.425mm
3 7/8" |
| Min Label Width |
20mm
13/16" |
25mm
15/16" |
55mm
15/16" |
| Max Label
Repeat |
63.5mm
2 1/2" |
63.5mm
2 1/2" |
63.5mm
2 1/2" |
| Min Label
Repeat |
6.35mm
1/4" |
6.35mm
1/4" |
6.35mm
1/4" |
| Die Cut Only |
YES |
YES |
YES |
Notes: OD refers to "Outer
Dimension" of the roll, while ID refers to "Inner Dimension" of the
core. "Label Repeat" indicates the distance from the beginning of
one label to the beginning of the next label.
Loading the Towa Applicator Directions
| How to use Labeler (Towa
Applicator) |
 |
1.
Remove label guide by turning to the right and place your
roll of labels onto the spooler. Replace the guide by
pressing inward and turning to the left. |
 |
2.
Pull labels under the transparent pressure plate. Open the
bottom gate, releasing the latch marked "OPEN" (do not
force), and thread label edge along the bottom gate. |
 |
3.
Close the bottom gate by returning the latch marked "OPEN"
back into the locked position. The serrated edge is used to
remove the excess label liner. |
 |
4. Labels are
released as you squeeze the handle. As you squeeze, pull the
applicator along in a fluid motion over the surface of the
item being labeled. |
 |
Cleaning/Removing
Stuck Labels
Unscrew 2 screws. Easily remove stuck label by solvent for
strong adhesive. |
Notice:
- It's unnecessary to make a slit or slot on backing paper for
feeding of labels.
- Film with less than 50ųm thickness is unacceptable
- Use only die-cut labels
- A cotton-swab moistened with ALCOHOL, is recommended to wipe
adhesive from Mecha-Sensor
Towa Applicator List Pricing - Call for the RACO Discount Price!
| Model |
1-9 |
10+ |
| Towa AP65-30 |
$91.95 |
$89.95 |
| Towa AP65-60 |
$95.95 |
$94.95 |
| Towa AP65-100 |
$114.95 |
$98.95 |
Back to Applicator
Main Page
