Avery Weigh-Tronix E1070 indicator uncomplicated provides process control and data management to most standard and custom-configured weighing platforms using bench and floor scales

AVERY WEIGH-TRONIX

Avery Weigh-Tronix E1070 indicator

Control and Communication
Uncomplicated, the Avery Weigh-Tronix Model E1070 provides process control and data management to most standard and custom-configured weighing platforms using bench and floor scales. Offering the advantage of the built-in interfaces-Ethernet 10/100, PROFIBUS® and DeviceNet™-the indicator/controller is ideally suited for sharing data in tank weighing and truck scale applications.

In addition to network interfaces, the Avery Weigh-Tronix Model E1070 connects to printers, remote displays, computers and SensorComm™. SensorComm is the Avery Weigh-Tronix micro-processor-based digital junction box. It gives unparalleled flexibility to truck scales and batching Weigh Bar® systems.

The bright LED display with 0.8" digits allows the operator to view weights with a quick glance.

Specialized Applications
Checkweighing: The display includes a multi-segment fan graph for fast evaluation. The operator can instantly verify that products are within the target range or above or below acceptable tolerance.

Counting routines: The Model E1070 can display the number of pieces or average piece weight, along with gross, net or tare weights.

Peak weight: If a maximum weight reading is required, the Model E1070 can capture and display the peak measurement of stable weights.

Process control: The indicator is equipped with three setpoint controls to interface with relays for automated mixing or blending operations.

Added performance features
The Avery Weigh-Tronix Model E1070 can serve as a remote display in applications where weights must be read in two locations.

Weight information can be transmitted to peripheral printers and/or computers through the indicator’s dual communication ports. The format of the information may be customized and can include time and date.

A NEMA 6/4X rated enclosure ensures reliable, continuous operation in dusty or wet environments.

An optional remote foot control is available for improved efficiency in common "lift and weigh" applications. It gives the operator hands-free control of common scale functions: Zero, Print, Tare, Units or F1.

Avery Weigh-Tronix E1070 indicator Specifications

Power requirements
85-265 volts AC @ 0.3Amp maximum
50/60 Hz

Excitation
+/- 5 volts DC
Supports up to eight 350-ohm weight sensors

Analog signal input range
+/- 60mV

Analog signal sensitivity
0.2 μV/divisions minimum
1.0 μV/divisions recommended

Calibration
2 to 5 points stored

Operational keys
Twenty-two keys: Tare, Select, Zero, Print, Units, F1, Clear, Mode, Escape, Enter, On/Off, Decimal, 0-9 Numeric

Operational annunciators
Center of Zero, Motion, Gross, Net, Tare
Under/Target/Over
Units of measure (LB, KG)
Print, OP1, OP2, OP3, Pt Tare

Display
Six-digit, seven-segment, 0.8" high, LED

Display rate
Selectable (1, 2, 5, 10)

Analog to digital conversion rate
100 times per second

Unit of measure
Pounds, kilograms, custom

Capacity selections
999,999 with decimal located from zero to five places

Incremental selections
Multiples and sub-multiples of 1, 2, 5

Programmable selections
Zero range, motion detection, automatic zero tracking, five-point linearization

Time and date/RAM
Battery backed up real time clock and RAM standard

Internal resolution
53,687,100 counts per mV/V per second

Harmonizer™ digital filtering
Fully programmable to ignore noise and vibration

Standard inputs
Three logic level inputs for: Zero, Print, Tare, Units and F1

Standard outputs

10/100 Ethernet (Modbus/TCP, TCP/IP, SMTP, DHCP, Ethernet/IP)

PROFIBUS DP

DeviceNet

Two serial ports

RS232/422/485 (SensorComm) selectable

RS232 or 20mA current loop

Three cutoff outputs

Serial command inputs/outputs
Programmable serial response to ASCII character input
SMA protocol, Broadcast

Self diagnostics
Display, keys, inputs, outputs, serial port, A to D converter

Circuitry protection
RFI, EMI and ESD protection

Options
Analog output/Pulse input
ControlNet™
TIU3
Washdown remote foot control

Operating applications
General weighing with accumulation, Batching, Counting, Checkweighing, Peak measurement, Remote display

Operating temperature
14° to 104°F (-10° to 40°C) NTEP
-40° to 140°F (-40° to 60°C) non-legal
Up to 95% non condensing humidity

Enclosure
Stainless steel NEMA 6/4X

Dimensions
9.25" W x 9.25" H x 4.5" D (without mounting bracket)
9.75" W x 11" H x 7" D (with mounting bracket)

Weight
8.5lb, 4kg

Agencies
NTEP CC#04-031 - Class III/IIIL: 10,000 divisions
OIML pending
Canadian weights and measures pending
UL/CUL
CE marked

Specifications subject to change without notice.

Call 513-984-2101 or 800-446-1991 for the RACO Discount Price!

Back to Weigh-Tronix main

RACO Industries has competitive prices and quality, guaranteed. View our Manufacturers Listing Page to see a listing of manufacturers with their products that we sell or visit our Home Page to learn more about the products that we carry and about RACO Industries. To hear our most recent low prices just call us at 513-984-2101 or 800-446-1991!

RACO Industries also carries a full line of barcoding printers, supplies, software and accessories. Call for more details!